7 Steps to Clean the HP Toner From Your HP Printer

Users of HP printers usually have to reset the machine errors and ink related functions, especially cleaning. This need arises with both regular and irregular usage. With the regular use, the ink makes the layer on printer head and in case of irregular use, it can be clogged on the nozzle. So, in all cases and to expand the life of your equipment it is crucial to make its adequate cleaning on time. Moreover, regular cleaning also provides a way to reuse the ink tank and save many bucks. But, before starting cleaning, you must consider the specific model and its important functions, like:

How to Restart the Device?

If you need to reset the HP printer and return to the original settings, then you should perform the simple steps:

• In the HP printer program, you need to find the File menu.
• After finding the “Restart” option, click on it.
• When the corresponding window pops up, it will confirm that you want to restart the device now or later.
• Remember, the memory will deleter fonts downloaded due to a reset.

HP Printer Toner Cleaning Steps

Almost all the HP printers models have different ways to clean toner. So, before going to start cleaning, you must read your printer’s user manual carefully. But, below are some common steps to clean toner from your printer.

1. Remove the ink cartridge from the printer and then switch off the printer properly.
2. Once you have removed the cartridge, you can perform the cleaning function by removing clogged ink from the printer nozzle. You can also use a paper towel to spray the window cleaner.
3. The ribbon is also an important part of a printer, so it must be cleaned properly to get the best results.
4. After ribbon cleaning, go for cartridge house cleaning. As there is a high quality of dust and grams and ink particles accumulation.
5. Now, move to stabilizer bar cleaning that allows the cartridge to travel back and forth to access page. To get smooth operations, you must go with its proper oiling.
6. Once you get satisfied with the cleaning process, you should go ahead with fixing the toner cartridge as before.
7. Remember, after cleaning initially it may not be able to deliver the best results, but don’t worry after 3-5 pages you will get the desired results.

With these steps, HP printer experts always advise its users to use quality ink so as to avoid unwanted damage to the machine.

Ways of Zeroing Errors

After performing a cleaning function, sometimes the printer model starts displaying some errors for the occurrence of malfunctions, if any arise. So, in such cases, you need to self diagnose the device and fix the error code displayed or flashing the LEDs of HP Laserjet, Deskjet 2130, HP 4283, and other systems.

Although HP printers are reasonably reliable, they can also fail. Therefore, you should know how to reset the HP printer error. Among the existing errors, there can be a malfunction with code 79. So the device signals a software failure. So, in order to reset, the following algorithm of actions is provided:

• The device must be disconnected from the power supply, after which it is necessary to wait at least 30 seconds.
• After turning “on” the printer, wait for it to come in an appropriate condition.
• If the errors did not disappear, you may need to reset the print queue or you have to reinstall the driver.

The displayed errors are reset in different models of the printer in their own way. For example, when you want to reset the HP Laserjet printer to come back to its settings, you need to remember that all the pages in the printer will be deleted from the printer’s memory.

If you have a Laserjet device with a touch panel:

• Press the button “Setup”;
• Click on the “Service” option
• Scrolling through the list, you should find the option “Restore default values”, after which the action can be confirmed.
• Go with resetting settings on other models

Resetting your HP 2050 printer is often required if you need to install a cartridge after refuelling. In order for the device to do its job, you must:

• Disconnect the USB cable from the device, while removing the power cable is not worth it.
• Press “Cancel” and “Color Copy” buttons, simultaneously;
• Without releasing the key, the power is turned off and on.
• The printer will attempt to turn on, but it will not succeed. After releasing the buttons, you should start the machine.

You can reset the HP Photosmart printer (model C5183) as follows:

• Remove the power plug of printer
• Press, “Ok” and “Help” buttons simultaneously.
• Press the key with a cross and a down arrow, the device must be turned on.

In some HP Photosmart devices, for example, C7283, ink error reset is accomplished by resetting the settings. To do this, click “Help” and “OK” and after the power plug is inserted, are held until it returns to the original parameters. You can solve problems with HP brand printers by resetting the settings. The main thing is to take into account the model of the device and adhere to the correct algorithm of actions.

Bottom Line

Finally, it is hard to purchase a new printer or cartridge toner every time the printer showing error. So, in order to avoid such cost, following the above tips can help you to save money and getting optimal output.

Author Bio

Jack William is a marketing specialist from Wellington, New Zealand. He works as a Digital Marketer for Printzone, which is the biggest warehouse of Cheap Printer Cartridges. He also writes articles on technology and business for several online magazines and websites.